|
Manufacturers
 |
www.pacstainlessltd.com |
|
Pac Stainless |
|
|
| PAC carries a huge variety of tubing ranging from 1/16" O.D. through 4" O.D. Wall thicknesses range from .010" through .250". Alloys we stock are as follows: 304/L, 316/L, 316/H, 317/L, Monel 400 and 2507. |
 |
COILED TUBINGPAC is stocking welded and seamless coils in 1/16", 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", and 3/4". Wall thicknesses range from .010" through .065". You can buy a 10,000' length or we can cut as small as 50'. |
 |
PIPEPAC Stocks IPS pipe sizes ranging from 1/8" through 8" in schedules 10, 40, 80, 160, and XXH. We have welded and seamless pipe in types 304/L and 316/L. |
 |
| |
Back to top |
 |
www.pyromation.com
| |
Pyromation Inc. |
|
|
| Thermocouples, RTD’s, Protection Tubes and Thermowells. Custom lengths, configuration, protection and connections all available in house; 5-7 Day standard delivery with same day, 24 hour and 72 hour rush options on most configurations. |
| THERMOCOUPLES - Thermocouples are the most common, convenient, and versatile devices used to measure temperature. They convert units of heat into useable engineering units that serve as input signals for process controllers And recorders. |
|
 |
| A thermocouple consists of a welded 'hot' junction between two dissimilar metals - usually wires - and a reference junction at the opposite ends of the parent materials. Heating the 'hot' junction in the working environment produces a temperature gradient which generates an Electromotive Force (EMF). The EMF appears across the free ends of the thermocouple wires where it is measured and converted into units of heat calibration. Through selection of appropriate thermocouple wires and sheath components, thermocouples are suitable to be used in temperature ranges from (-200 to 2316) °C [-328 to 4200] °F. |
| RESISTANCE TEMPERATURE DETECTORS - Resistance temperature detectors (RTD) accurately sense temperature |
|
 |
ADDITIONAL REQUIREMENTS - Other components usually essential in integrating the principles of thermocouples and with an excellent degree of repeatability and interchangeability of elements. The RTD is composed of certain metallic elements whose change in resistance is a function of temperature. In operation, a small excitation current is passed across the element, and the voltage, which is proportional to resistance, is then measured and converted to units of temperature calibration.
The RTD element is manufactured by winding a wire (wire wound elements) or plating a film (Thin film elements) on a ceramic or glass core and sealing the element within a ceramic or glass capsule.
Since most RTDs have a low initial resistance, often 100 ohms, and have a small change in resistance per unit of temperature range, the resistance of the lead wire is often compensated for with a three or four wire bridge configuration built into the measuring devices. By selecting the proper elements and protective sheathing, RTDs can operate in a temperature range of (-200 to 650) °C [-328 to 1202] °F. |
|
RTDs into a functioning system may include:
- A protection tube or sheath of a material suitable to protect the sensing element from the environment surrounding the point of measurement
- A connecting head and terminal block, or possibly a temperature transmitter
- Leadwire of the correct material and insulation to connect the temperature sensor and the process instrumentation
- Recording or controlling instrumentation and control devices to provide a continuous temperature history
of the system and to provide constant or programmed temperature regulation
|
 |
| |
Back to top |
 |
www.stauffusa.com |
|
Stauff |
|
|
| Stauff offers a wide selection of HYDRAULIC products, worldwide for Industrial, Mobile, General Industrial Pipe Construction, Marine, Offshore, Mining, and Nuclear Reaction Construction. |
- Pipe and tube clamps
- Ball Valves up to 12,000 psi
- Filtration
- Test
- Diagtronics
|
|
|
 |
 |
 |
| |
Back to top |
 |
|
|
Sterling Flex Tube |
|
|
| Flexible Teflon or Metal Tubing With Stainless Steel Overbraid and Tube Stub End Connections. (Other End Connections are also available.) |
|
|
 |
 |
 |
| |
Back to top |
 |
www.channel-track.com |
|
Channel-Track & Tube-Way |
|
|
| Manufacturers of support systems for Cable Tubing and Wire in Stainless, Aluminum, H.D. Galvanized, and Fiberglass. Available in 2”, 3”, 4” and 6” widths. |
- Cable Tray
- Angle
- Channel
- Splice
- Tee
- Inside/Outside Bends
- Gang / Yoke Clamps
- Instrument Stands
- Manifolds
- Condensate Pots
|
 |
|
| |
Back to top |
 |
www.teltru.com |
|
Tel-Tru Manufacturing |
|
|
| Tel-Tru Manufacturing Company is a World-Class manufacturer of bimetal thermometers, pressure gauges, and transmitters. Our focus has always been to meet customers' requirements with quality products, leading technology and responsive service. Our products are available through a network of distributors, in the United States and around the world. |
 |
| |
Back to top |
| |
